Works in Unreal Engine 5.7 and 5.8. Updated November 2026.
Quick answer: your files aren’t being damaged. Three things make them quieter in Unreal:
- Platform headroom. On Windows every sound is played 3 dB lower (
PlatformHeadroomDB=-3). Set it to 0 in your project’sConfig/Windows/WindowsEngine.ini. - Mono files. By default a mono sound is sent at half level to each speaker, about 6 dB lower. Use stereo files, or change Project Settings > Audio > Mono Channel Upmix Method.
- Attenuation. A sound with attenuation gets quieter with distance. Compare levels with attenuation off.
Don’t fix it by raising a submix’s Dry Level. That plays the sound twice.
The hidden -3 dB on Windows
Each platform has a headroom value in the engine’s config files. In 5.8 it’s -3 dB on Windows, -6 dB on Mac, iOS and Android, and 0 dB on Linux. That’s why Audio Insights (Tools > Audio Insights) shows a sound at default volume as about 0.708.
An Epic audio developer explained on the forums that it’s left over from the old per-platform audio renderers, kept so that older projects still sounded the same, and that you can bypass it.
To remove it on Windows:
- Close the editor.
- In your project folder (not the engine), open or create
Config/Windows/WindowsEngine.iniand add:
[Audio]
PlatformHeadroomDB=0
Then reopen the project. For Mac, put the same lines in Config/Mac/MacEngine.ini.
Keep a safety margin. The headroom helps stop the mix clipping when many sounds play at once. At 0, put a limiter on your master submix or mix your loudest sounds a little lower.
Mono files play about 6 dB lower
Unreal has to spread a mono file across two or more speakers. Project Settings > Audio > Mix has a setting for this, Mono Channel Upmix Method (it may be under the advanced options):
| Setting | Level sent to each side |
|---|---|
| Linear (default) | 0.5, about -6 dB |
| Equal Power | 0.707, about -3 dB |
| Full Volume | 1.0, no change |
DAWs handle mono differently, so pick the one that matches how you mix, then restart the editor. Or export stereo files for 2D sounds such as UI and music.
Don’t turn up the submix Dry Level
A new submix has Output Volume and Wet Level at 0 dB and Dry Level at -96 dB. That’s normal. When a submix has no effects, the sound passes straight through and Wet Level isn’t used. Raising Dry Level mixes in a second copy of the same sound, so it gets about 6 dB louder, and a chain of submixes set that way can clip. Fix the headroom and the mono setting instead.
Attenuation too loud, or the sound disappears
Two settings in Sound Attenuation cause most of the confusion:
- Attenuation At Max (dB) only applies when Attenuation Function is Natural Sound. It’s the level at the edge of the falloff, and -60 dB is the lowest it goes. It doesn’t set the overall volume.
- With Natural Sound, the level drops evenly in dB across the falloff. At half the Falloff Distance it’s already at -30 dB. With a short falloff, the sound fades to almost nothing a few steps from the Inner Radius, so it seems not to play.
The fix:
- Set Attenuation Function to Linear. The sound is at full volume inside Inner Radius and fades evenly to silence at Inner Radius plus Falloff Distance. Now short distances behave the way you expect.
- To make the sound quieter overall, lower Volume on the Sound Wave, or Volume Multiplier on the Sound Cue or Audio Component. Try 0.3 to 0.5.
FAQ
Is the -3 dB a bug?
No. It’s an old default, and an Epic developer said it can be bypassed. It’s still -3 dB on Windows in 5.8.
Will changing the headroom affect my packaged game?
Yes. It’s an engine setting for that platform, so it applies in the editor and in builds for that platform.
Why does the sound cut out beyond a certain distance?
The listener is past the attenuation range. Raise Falloff Distance, or use Linear so the fade is predictable.