Footstep Sounds That Change with the Surface in Unreal Engine 5

Table of Contents

Works in Unreal Engine 5.0 to 5.8. Updated November 2026.

Quick answer: tag each floor with a surface type, then check it on every step.

  1. Add surface types (Grass, Wood, Stone) in Project Settings > Engine > Physics > Physical Surface.
  2. Create a Physical Material for each and set its Surface Type. Assign it to your floor materials.
  3. Add an Anim Notify named Footstep where each foot touches the ground in your walk and run animations.
  4. On that notify, line trace down from the character, get the surface type from the hit, and play the matching sound.

Step 1: Create surface types

  1. Open Project Settings > Engine > Physics.
  2. Under Physical Surface, give names to the first slots: SurfaceType1 = Grass, SurfaceType2 = Wood, SurfaceType3 = Stone.

Step 2: Create Physical Materials

  1. In the Content Browser, right-click Physics > Physical Material. Name it PM_Grass.
  2. Open it and set Surface Type to Grass.
  3. Repeat for each surface.

Now assign them:

  • Meshes: open the floor’s material and set Physical Material in its details panel. Every mesh using that material is now “grass”.
  • Landscape: open each paint layer’s Layer Info asset and set its Phys Material.

Step 3: Add footstep notifies

  1. Open your walk animation.
  2. In the Notifies track, right-click at the frame where the left foot lands and choose Add Notify > New Notify. Name it Footstep.
  3. Add another for the right foot, then repeat in the run animation.

Step 4: Trace and play the sound

Open your character’s Animation Blueprint, go to the Event Graph and add Event AnimNotify_Footstep. Then:

  1. Try Get Pawn Owner and get its Actor Location.
  2. Line Trace By Channel from that location to the same location minus 150 on Z, with Actors to Ignore set to the pawn.
  3. Break Hit Result, drag from Phys Mat and add Get Surface Type.
  4. Add a Switch on EPhysicalSurface and play a different sound on each output with Play Sound at Location (location: Impact Point).
  5. Use the Default output for surfaces you haven’t set up.

Use a Sound Cue or MetaSound with a few random variations for each surface, so steps don’t sound like a loop.

Footsteps not working?

ProblemFix
Always the default soundThe floor has no Physical Material. Check the material or the landscape layer info.
No sound at allThe notify name doesn’t match the event, or the trace is too short. Draw the trace with Draw Debug Type: For Duration.
Surface is wrong on some meshesThe mesh uses its own collision material. Set Phys Material Override in the mesh component’s Collision settings.
Same volume everywhereAdd attenuation to the sounds. See Sound attenuation not working.

To check what the trace hits, print the Phys Mat with Get Display Name.

FAQ

Can I use this for jumping and landing? Yes. Call the same trace from your character’s On Landed event.

Does this work for AI characters? Yes. The Animation Blueprint runs for every character that uses it.

Should footsteps be louder when running? Add a Volume Multiplier based on speed: get the pawn’s velocity length and map it to 0.6–1.0.

Related tutorials